SAC 3600 Series страница 7 Скачать руководство пользователя

Страница: 7 / 134

Page # 7

877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com

OPERATION

REPLACEMENT PARTS

READ complete manual CAREFULLY

BEFORE attempting operation.

877 1st Ave. N.W. | Sioux Center, IA 51250 | Toll Free: 1.866.722.1488 | siouxautomation.com

OPERATION

REPLACEMENT PARTS

READ complete manual CAREFULLY

BEFORE attempting operation.

SAFETy...yOu CAN LIvE WITH IT

EquIPMENT SAFETy GuIDELINES

yOu

are responsible for the

SAFE

operation and maintenance of your 3600 series mixer.

yOu

must ensure that

yOu

and

ANyONE

else who is going to operate, maintain, or work around the mixer be familiar with the operating

and maintenance procedures and related SAFETY information contained in this manual. This manual will take you

step-by-step through your working day and alerts you to safety practices that should be adhered to while operating

the machine.

Remember,

yOu

are the key to

SAFETy

. Good safety practices not only protect you but also the people around you.

Make these practices a working part of your safety program. Be certain that EVERYONE operating this equipment is

familiar with the recommended operating and maintenance procedures and follows all the safety precautions. All

accidents can be avoided. Do not risk injury or death by ignoring good safety practices.

•

Vertical Mixer owners must give operating instructions to operators or employees before allowing them

to operate the machine, and at least annually thereafter.

•

The most important safety device on this equipment is a

SAFE OPERATOR

. It is the operator’s

responsibility to read and understand

ALL

Safety and Operating instructions in the manual and

to follow them.

•

Sioux Automation Center, Inc. feels that a person who has not read and understood all operating and

safety instructions is not qualified to operate the machine. An untrained operator exposes himself

and bystanders to possible serious injury or death.

•

Do not modify the equipment in any way. Unauthorized modification may impair the function and/or

safety and could affect the life of the equipment.

•

Think SAFETY! Work SAFELY!

In order to provide a better view, certain illustrations in this manual may show an assembly with a safety shield

removed. However, equipment should never be operated in this condition. Keep all shields in place. If shield removal

becomes necessary for repairs, replace shield prior to use.

Replace any caution, warning, danger or instruction safety decal that is not readable or is missing. Location of such

decals are indicated in this booklet.

Do not attempt to operate this equipment under the influence of alcohol or drugs.

•

Only trained, competent persons shall operate the vertical mixer. An untrained operator is not

qualified to operate the machine.

•

Have a first-aid kit available for use should the need arise and know how to use it.

•

Provide a fire extinguisher for use in case of a fire. Store in a highly visible place.

LIGHTING AND MARKING

It is the responsibility of customer to know lighting and marking requirements of local highway authorities and to

install and maintain equipment to provide compliance with regulations. Add extra lights when transporting at night

or during periods of limited visibility.

SAFETY

Содержание 3600 Series







































































































































Результаты поиска

Содержание 3600 Series

Отзывы:

Похожие инструкции для 3600 Series

Бренды по названию

Популярные бренды

SAC 3600 Series, Руководство оператора

Результаты поиска

Содержание 3600 Series

Отзывы:

Похожие инструкции для 3600 Series

Бренды по названию

Популярные бренды