EN
ROTARY TOOL
Thank you for buying this Sabrecut product.
By doing so you now have an excellent
product, delivered by one of Europe’s leading
suppliers. All products delivered to you by
Sabrecut are manufactured according to the
highest standards of performance and safety.
As part of our philosophy, we also provide
excellent customer service, backed by our
comprehensive warranty. We hope you will
enjoy using this product for many years to
come.
The numbers in the following text refer to
the pictures on page 4-5
Read the operating instructions
carefully before using this device.
Familiarise yourself with its functions
and basic operation. Service the device as per
the instructions to ensure that it always
functions properly. The operating instructions
and the accompanying documentation must be
kept in the vicinity of the device.
Contents
1. Machine data
2. Safety instructions
3. Assembly of accessoires
4. Mounting the flexible shaft and stand
5. Maintenance
1. Machine data
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment
of exposure to vibration when using the tool for
the applications mentioned.
-
using the tool for different applications, or with
different or poorly maintained accessories,
may significantly increase the exposure level.
-
the times when the tool is switched off or when
it is running but not actually doing the job may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
Features
Fig. 1
1. Collet chuck
2. Ring
3. Spindle lock
4. Speed adjusting wheel
5. Switch
2. Safety instructions
Explanation of symbols
Technical specifications
Charger XZ1350-1800G/LB
Input of charger 100-240V~ 50/60Hz 15W
Output of charger 13,5V DC 1.8A
Rechargeable battery
12 V Li-ion 1.5 Ah
Battery charging time
60 Minutes
Maximum disc diameter
Ø24 mm
No load speed
5.000
–25.000/min
Capacity of spring chuck
3.2 + 2.4 mm
Weight
0.4 kg
Lpa (Sound pressure level)
70.9+3 dB(A)
Lwa (Sound power level)
81.9+3 dB(A)
Vibration
34.25+1.5 m/s
2