![background image](http://html1.mh-extra.com/html/sabo/saa11781/saa11781_operators-manual_795010038.webp)
38
LED display on the charger
SAU15033
LED 1
LED 2
Meaning
illuminates
red
illuminates
red
Battery charging
illuminates
red
illuminates
green
Battery is fully charged.
illuminates
red
illuminates
orange
Battery is too warm
(remove and leave to cool
for about 30 minutes)
illuminates
red
off
Readiness
illuminates
red
flashes
red
Error (see also chapter
"What to do if there is an
error display"
)
SAU16509
LED 1
LED 2
Meaning
illuminates
red
off
Readiness
illuminates
red
flashes
green
Battery
charging
illuminates
red
illuminates
green
Battery is fully
charged
flashes red
off
Battery is too
warm (remove
and leave to
cool for about
30 minutes)
flashes red
flashes
green
Error (see
also chapter
"What to do
if there is an
error
display"
)
All models
What to do if there is an error display
– If the charger shows an error after the battery has been inserted, remove the battery and insert it again after
about 1 minute.
If the charger no longer shows an error, the battery is OK.
– If the charger still shows an error, remove the battery and unplug the charger. Reconnect the charger to the
mains supply after roughly 1 minute and reinsert the battery.
If the charger no longer shows an error, the battery is OK.
– If the charger still shows an error, the battery is defective and must be replaced.