SABINE FBX SOLO 620 SL-620 Скачать руководство пользователя страница 1

OPERATING

GUIDE

SL-620
SM-620

INSIDE THIS GUIDE:

About the FBX

2,3

Quick-Start Operation

2

FBX-SOLO Controls

4,5

Applications

6-8

Understanding Fixed

   & Dynamic Filters

9

Operating Instructions 10-12

Troubleshooting Tips

13

Product Specifications

14

Cautions

14

Warranty

15

FBX and FBX Feedback Exterminator are registered trademarks of Sabine, Inc., and are the brand names of its line of automatic

feedback controllers.  Covered by U.S. Patent No. 5,245,665, Australian Patent No. 653,736, Canadian Patent No. 2,066,624-2,

German Patent No. 69118486.0, and British Patent No. 0486679. Other patents pending.  

© 

1996 Sabine Inc.

FBX-SOLO

Model SM-620

FBX-SOLO

Model SL-620

CONGRATULATIONS!  

You now have the state-of-the-art in feedback control. The Sabine

FBX-SOLO

 gives you automatic real-time feedback control for any channel on your mix.  In

setup 

and

 during the performance, it gives you more gain and increases the clarity of your

mains and monitors. It's the affordable solution to feedback problems, perfect for wireless

mics, monitors, acoustic/electric instruments, harmonica mics, multi-mic locations like

conference rooms and courthouses -- wherever there's an open microphone.

The FBX-SOLO

 

incorporates the latest in design and digital signal processing technology.

It automatically senses feedback in a sound system and determines its pitch.  It then places

one of its six constant "Q" micro-filters on the resonating frequency and eliminates the

feedback in typically less than one second.

Special features of the SL-620 and SM-620:

• The SL-620 has 

1/4" in/out connectors 

and 

input/output level switches

 for any

combination of ins and outs.  The SL is for use with acoustic/electric guitars and guitar

amplifiers, mixer insert points, powered mixer patch points and high impedance mics.

• The SM-620, with 

selectable phantom power,

 has 

XLR in/out connectors

 for use with

balanced microphones.

• Both models offer standard FBX features like 

switchable filter widths

 and 

lockable

fixed filters.

See page 2 for quick-start operating procedures.

Содержание FBX SOLO 620 SL-620

















Отзывы: