Approx 90mm
Servo Mount
5mm
Linkage line
35mm
40mm
150mm
81mm
Cut Zone
S0040_rev01
Page 1
Preparation for the servos
Servo Linkage Assembly ...x2
(S0039-S)
Clevis
Linkage Rod M2x56mm
Plastic Ball Linkage
Note:
To adapt the different servos on the market, it is necessary
to cut the wood support optimizing your servo dimension
Use epoxy to glue in the servo mount.
Rudder Servo Mount Assembly ...x2
Please read this user manual carefully, it contains instructions for the correct assembly of this SAB Tortuga upgrade.
Please refer to the website www.sabavio.com for updates and other important informations. Thank You.
This upgrade need 2 micro servos with height 8-10mm. We suggest: MKS DS75K-N or KST X08Hv5.0.
Use the rudder channel for Connect the 2 servos.
Use a Dremmel drill for cut the fuselage slot 35x40mm.
Follow the dimension in the picture
KT84 TORTUGA
RUDDER KIT
