Assembly and operating manual
rtv.sabaj.pl/en/home/
3.
Put the Swing-Mount and then move it down
(fig. 3).
NOTE:
The device is symmetrical, mounting option for any
opening direction (right-left).
4.
Open the device and tighten the screws.
Open Swing-
Mount manually or program the control box.
NOTE:
Double check if the device is leveled using the provided
spirit level (fig. 4).
Mounting the TV to the mount
5.
Mount the vertical beams to the TV using screws supplied by the TV manufacturer,
or
optionally one of the included in the set (M4x25; M5x25; M6x25; M8x25). If needed, use the
supplied spacer elements to mount the TV
(fig. 5).
fig. 3
fig. 4
fig. 5
