K-ROTOLIFT RF + AUTOLID
22
10. Move the vertical beams lock in the accordance with an arrow (fig. 10), and then tighten
them with an allen key (page 18).
Lid assembly
11. Prepare the lid - make recesses for mounting the hinges. For suggested dimensions of the
cover and recesses, see fig. 11.
Note:
The minimum thickness of the cover is 18 mm, the maximum weight is 6 kg.
12. Install additional flange to the furniture (optional
– fig. 12)
fig. 10
fig. 11
installation of additional flange can enhance
aesthetics and allow gain extra space from the
front side for deeper furniture
fig. 12
