manualshive.com logo in svg

Saab R5 SUPREME Secure W-AIS, Эксплуатация и установка, Страница: 35 / 54

Поделиться
Скачать
Saab R5 SUPREME Secure W-AIS Скачать руководство пользователя страница 35

 

 R5 

SUPREME Secure W-AIS System

 

CONFIGURATION 

7000 118-524, C1 

 

Page 35 

3.9.1 

Externally Generated Position 

If  an  external  position  source  is  used  for  the  bogus  position  reports  it  must  provide 
latitude, longitude, COG and SOG in order for the R5 SUPREME W-AIS Transponder 
to use the information. A position source that provides NMEA sentences GGA and VTG 
or  the  sentence  RMC  is  enough  for  the  transponder  to  accept  the  information.  If  the 
configured source provides heading and rate of turn, that information will be used in the 
bogus position source as well.  

NOTE: The port configured as bogus position source will be dedicated for bogus 
data  and  is  thus  not  used  by  the  R5  SUPREME  transponder  as  source  for  true 
position data.  

To  start  using  the  provided  bogus  position  information,  navigate  to  the 

Operational 

Mode

 view by pressing 

Main Menu 

 AIS 

 Operational Mode

 

and set the “Bogus 

Position” parameter to “Use Bogus Position”. A bogus position icon will  appear in the 
status bar of the R5 SUPREME CDU to indicate that bogus position is in use.  

 

Figure 23 

– Operational Mode view 

3.9.2 

Internally Generated Position 

If  the  “Bogus  Position  Source”  parameter  is  set  to  “Internally  Generated”,  the  R5 
SUPREME W-AIS Transponder will calculate latitude, longitude, COG, SOG, ROT and 
HDG  used  in  the  bogus  position  reports  based  on  the  start  values  configured  in  the 

Bogus  Position

  view.  The  view  can  be  accessed  from 

Main  Menu 

  AIS 

 

Operational Mode 

 

Set Start Position… 

 

Figure 24 

– Internally Generated Bogus Position, start values 

Содержание R5 SUPREME Secure W-AIS























































Отзывы:

Нет отзывов