Saab 2008 9-7x, Руководство пользователя

Страница: 131 / 426

Windshield Wipers
The lever on the right side of the steering column
operates the windshield wipers.
7 (Mist): Pull the lever down and release it for a
single wiping cycle. The lever will return to its original
position. For more cycles, hold the lever down
before releasing it.
9 (Off): Put the lever in this position to turn off
the wipers.
& (Delay): Put the lever in this position to set a
delay between wipes. Turn the delay adjustment
band to set the length of the delay.
x (Delay Adjustment): Use this band to set the
length of the delay between wipes when using the delay
feature. The closer you move the band toward mist,
the longer the delay. The windshield wiper lever must
be in delay for this feature to work.
6 (Low Speed): Put the lever in this position for
slow, steady wiping cycles.
1 (High Speed): Put the lever in this position for
rapid wiping cycles.
If the windshield wipers are in use for about six seconds
while you are driving, the exterior lamps will come on
automatically if the exterior lamp control is in AUTO.
Be sure to clear ice and snow from the wiper blades
before using them. If they’re frozen to the windshield,
gently loosen or thaw them. If the blades do become
damaged, install new blades or blade inserts. For more
information, see Windshield Wiper Blade Replacement
on page 5-57.
Heavy snow or ice can overload the wiper motor. A
circuit breaker will stop the motor until it cools down.
Clear away snow or ice to prevent an overload.
3-9