4
E l e c t r i c a l R a t i n g s
Do not exceed the maximum electrical output rating of each unit listed below.
Model Input
CLSFJB
12VAC, 60 Hz, 0.42A max
CLSFJB2
12VAC, 60 Hz, 0.42A max (x2)
R e c o m m e n d e d To o l s a n d S u p p l i e s
1.
Circular hole saw for installation of 3/4” and or 1” non-metallic conduit depending on installation
requirements. Do not use spade bits for opening the conduit knockouts.
2. Application appropriate and approved ‘rain-tight’ or ‘wet location’ conduit hubs.
* Note:
Every installation will have at least two (multi) conduits – one or more for low voltage
input power and one or more for fiber optic cable.
3. Slotted screw driver, size #2
4. Phillips screw driver, size #2
5.
Drill
6. #10 Screws appropriate for installing the product onto a wall (Installer supplied)
* Note:
It is recommended to hand tighten all screws and screw fasteners inside the enclosure
and front cover until snug and secure. Be sure not to overtighten as permanent damage may
occur.