INDUS 2
TM
INSTALLATION INSTRUCTIONS
VANITY STAND
V-INDUS2-24DW | V-INDUS2-30DW
V-INDUS2-36DW | V-INDUS2-48DW
SUGGESTED TOOLS AND MATERIALS
Phillips Screwdriver
Level
Drill
Tape Measure
Safety Glasses
1 0 '
ROUGHING-IN
21.5" (546mm)
10.75" (273mm)
X” (ymm)
33.9" (862mm)
3.9" (100mm)
0.8" (20mm)
5.5" (140mm)
6.5" (165mm)
V-INDUS2-24DW
24” 610mm
V-INDUS2-30DW
30” 762mm
V-INDUS2-36DW
36” 914mm
V-INDUS2-48DW
48” 1219mm
Model #
X
THANK YOU FOR CHOOSING RYVYR
Please take a few minutes to review this manual before you start installation. If you encounter
any installation problems, please don’t hesitate to contact us. Before you begin, please
observe all local building codes. Unpack the new product and inspect for damage. The
appearance of your vanity may differ from the illustrations in this guide. These instructions
still apply. Please ensure the finished wall is straight and plumb and the floor is flat and
perpendicular to the finished wall.
12.2015
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
FLOOR
FINISHED
WALL
Y
