background image

3

ENGLISH

SYMBOLS

 

SYMBOL 

SIGNAL 

MEANING

 
 

 

DANGER:

 

Indicates an imminently hazardous situation, which, if not avoided, 

 

 

 

will result in death or serious injury.

 

 

WARNING:

 

Indicates a potentially hazardous situation, which, if not avoided, 

 

 

 

could result in death or serious injury.

 

 

CAUTION:

 

Indicates a potentially hazardous situation, which, if not avoided, 

 

 

 

may result in minor or moderate injury. 

 

 

CAUTION:

 

(Without Safety Alert Symbol) Indicates a situation that may result in property  

 

 

 

 

damage.

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SERVICE

Servicing  requires  extreme  care  and  knowledge  and  should  be 
performed  only  by  a  qualified  service  technician.  For  service  we 
suggest  you  return  the  product  to  your  nearest AUTHORISED 
SERVICE  CENTRE  for  repair.  When  servicing,  use  only  identical 
replacement parts.

WARNING:

To  avoid  serious  personal  injury,  do  not  attempt 
to  use  this  product  until  you  read  thoroughly  and 
understand  completely  the  operator’s  manual.  If  you 
do  not  understand  the  warnings  and  instructions  in  the 
operator’s  manual,  do  not  use  this  product.  Call  Ryobi 
customer service for assistance.

WARNING:

The  operation  of  any  power  tool  can  result  in  foreign 
objects  being  thrown  into  your  eyes,  which  can  result 
in  severe  eye  damage.  Before  beginning  power  tool 
operation, always wear safety goggles or safety glasses 
with  side  shields  and,  when  needed,  a  full  face  shield. 
We  recommend  Wide  Vision  Safety  Mask  for  use  over 
eyeglasses or standard safety glasses with side shields. 
Always  use  eye  protection  which  is  marked  to  comply 
with EN 66 and AS/NZS337 standards.

SAVE THESE INSTRUCTIONS

INTRODUCTION

This product has many features for making its use more pleasant 
and enjoyable. Safety, performance, and dependability have been 
given  top  priority  in  the  design  of  this  product  making  it  easy  to 
maintain and operate.

DESCRIPTION OF FIGURES

Figure 
. Shoulder strap
2. Pro Cut II string head
3. Drive shaft
4. Coupler
5. Strap hanger
6. Ignition switch
7. Trigger lock
8. Rear handle
9. Primer bulb
0. Fuel cap
. Recoil starter
2. Throttle trigger
3. 2 Volt battery
4. Front handle
5. Wing screw
6. Grass deflection
7. Reel Easy Cutting head
8. Charger
9. Safety Switch
20. Latch
2. Choke lever

      

Figure 2
22. Trimmer attachment
23. Button
24. Guide recess
25. Power head shaft
26. Position hole

Figure 3
27. Hole
28. Hanger cap
29. Secondary hole

       

Содержание RLT30CET














Отзывы: