ENGLISH
3
ELECTRICAL SAFETY RULES
n
Make sure the cord is located so that it will not be stepped
on, tripped over or otherwise subjected to damage or
stress.
n
Do not abuse the power cord. Never carry the product
by the cord. Never pull the plug out of the power point
by the cord. Keep the cord away from heat, oil and sharp
edges.
n
For outdoors work use only suitably approved extension
cables with a min. conductor cross section of 1.5mm
2
The plug connectors must have earthing contacts and
be rain-water-proof.
n
Inspect extension cords for deterioration, cuts or cracks in
the insulation. Repair or replace the cords if any defects
appear.
n
A nameplate on the product indicates the unit’s voltage.
Never connect the product to an AC voltage that differs
from this voltage.
n
If the power cord or extension cable becomes damaged
during use, disconnect the cord from the supply
immediately. DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY.
n
Electrical power should be supplied via a Residual Current
Device (RCD) with a tripping current of not more than
30mA.
MAINTENANCE RULES
n
Maintain the product with care. Follow instructions for
changing accessories. Keep the product dry, clean and
free from oil and grease.
n
Unplug the product before making adjustments or repairs.
n
Do not use the product if parts have been damaged.
Check the product regularly to make sure that it will
operate properly and perform the intended function.
Check for alignment of moving parts, binding of moving
parts, breakage of parts and any other condition that
may affect the unit operation. Inspect the unit’s power
connection. Any part that is damaged should be properly
repaired or replaced by a Ryobi authorized service centre.
n
Keep the product clean of grass clippings and other
materials that may become lodged in the cutting lines
and air vents.
n
Never douse or squirt the product with water or any other
liquid. Do not use detergents or solvents. Keep handles
dry, clean and free from debris.
n
After each use, clean with a soft, dry cloth.
WARNING:
Before carrying out any maintenance operations, cut
off the electric power supply by disconnecting the
plug from the mains.
n
If the line cut-off blade is well worn or breaks, have this
replaced by contacting an authorized service centre.
SERVICE RULES
n
Service on this product must be performed by qualified
repair personnel only. Service or maintenance performed
by unqualified personnel could result in injury to the user
and/or damage to the product. Such service may also
void your warranty.
n
Use only identical replacement parts when servicing the
product. Follow the instructions in the Maintenance
section of this manual. Use of unauthorized parts or
failure to follow maintenance instructions may create a
risk of shock, serious injury to the user and/or damage
to the product. Such use may also void your warranty.
STORAGE AND TRANSPORTATION RULES
n
Stop the motor when you are not trimming or when you
are walking from one trimming location to another.
n
Store the product inside in a dry place.
n
Store the product up high or lock it up to prevent
unauthorized use or damage. Keep the product out of
the reach of children.
n
Secure the product when transporting it.
n
Save these instructions. Refer to them frequently and
use them to instruct others who may use this product. If
you loan someone this product, loan these instructions
also.
n
Never allow children or people unfamiliar with the
instructions to use the machine.
TRAINING
n
Read the instructions carefully. Be familiar with the controls
and the proper use of the machine.
n
Never allow people unfamiliar with these instructions
or children to use the machine. Local regulations may
restrict the age of the operator.
n
Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
PREPARATION
n
Before use, check the supply and extension cord for signs
of damage or aging. If the cord becomes damaged during
use, disconnect the cord from the supply immediately. DO
NOT TOUCH THE CORD BEFORE DISCONNECTING
THE SUPPLY. Do not use the appliance if the cord is
damaged or worn.
n
Never operate the machine while people, especially
children, or pets are nearby.
n
Wear eye protection and stout shoes at all times while
operating the machine.
OPERATION
n
Keep supply and extension cords away from cutting
means.
n
Use the machine only in daylight or good artificial light.
n
Never operate the machine with damaged guards or
shields or without guards or shields in place.
SPECIFIC SAFETY RULES