Ryobi P3650, Руководство оператора

Страница: 32 / 100

32 − English
ADJUSTMENTS
DANGER:
Laser radiation. Avoid direct eye contact with light source.
WARNING:
Use of controls or adjustments or performance of
procedures other than those specified herein can result
in hazardous radiation exposure.
TO ADJUST THE LASER GUIDE
See Figure 46.

Set miter and bevel angles to 0º and lock in place.

Use the work clamp or a C-clamp to secure a piece of
scrap wood.

Place the battery packs in the saw and make a slight cut
to score the wood.

Release the switch trigger and allow the saw blade to
stop rotating before raising the blade.

Using a padlock, lock the switch trigger to make the saw
inoperable.

Press the laser guide button to temporarily turn on the
laser.
 To adjust the position of the laser, rotate the laser adjust-
ment screw. Turn the screw clockwise to move the laser
to the right and counterclockwise to move the laser to
the left.
NOTE: When properly aligned, the laser should be on
the left edge of the kerf. If laser does not align correctly,
return to your nearest
AUTHORIZED SERVICE CENTER
for repair.
Fig. 46
LASER
ADJUSTMENT
SCREW
LASER
GUIDE