background image

SAFETY RULES

 

When battery pack is not in use, keep it away from 

other metal objects like: paper clips, coins, keys, nails, 

screws, or other small metal objects that can make a 

connection from one terminal to another. 

Shorting the 

battery terminals together may cause sparks, burns, or a 
fire.

 

Always remove battery pack from your tool when you 

are assembling parts, making adjustments, cleaning, 

or when not in use. 

Removing battery pack will prevent 

accidental starting that could cause serious personal injury.

 

Always remove battery pack before storing the device.

 

Always wear eye protection with side shields marked 

to comply with ANSI Z87.1. 

Failure to do so could result 

in objects being thrown into your eyes and other possible 
serious injuries.

 

Keep battery pack dry, clean, and free from oil and 

grease. Always use a clean cloth when cleaning. 

Never 

use brake fluids, gasoline, petroleum-based products, or 

any solvents to clean battery pack.

 

Save these instructions. 

Refer to them frequently and use 

them to instruct others who may use this tool. If you loan 

someone this tool, loan them these instructions.

CALIFORNIA PROPOSITION 65

WARNING: 

This product contains chemicals, including lead, known to 

the State of California to cause cancer, birth defects and 

other reproductive harm. 

Wash hands after handling.

WARNING! 

 READ AND UNDERSTAND ALL INSTRUCTIONS. 

Fail-

ure to follow all instructions listed below, may result in 
electric shock, fire and/or serious personal injury. 

 

Battery tools do not have to be plugged into an elec-

trical outlet; therefore, they are always in operating 

condition. Be aware of possible hazards when not us-

ing your battery tool or when changing accessories. 

Following this rule will reduce the risk of electric shock, 
fire, or serious personal injury.

 

Do not place battery tools or their batteries near fire 

or heat. 

This will reduce the risk of explosion and possibly 

injury.

 

Do not crush, drop or damage battery pack. Do not 

use a battery pack or charger that has been dropped 

or received a sharp blow. 

A damaged battery is subject 

to explosion. Properly dispose of a dropped or damaged 
battery immediately.

 

Batteries can explode in the presence of a source of 

ignition, such as a pilot light. 

To reduce the risk of seri-

ous personal injury, never use any cordless product in the 
presence of open flame. An exploded battery can propel 
debris and chemicals. If exposed, flush with water imme-
diately.

 

Do not charge battery tool in a damp or wet location. 

Following this rule will reduce the risk of electric shock.

 

Charge only with Ryobi One+ 18V dual-chemistry bat-

tery chargers. 

Use of other chargers may result in personal 

injury, fire, or damage.

 

Do not charge in an area of extreme heat or cold. It will 

work best at normal room temperature. 

To reduce the 

risk of serious personal injury, do not store outside or in 
vehicles.

 

Under extreme usage or temperature conditions, bat-

tery leakage may occur. If liquid comes in contact with 

your skin, wash immediately with soap and water. If 

liquid gets into your eyes, flush them with clean water 

for at least 10 minutes, then seek immediate medical 

attention. 

Following this rule will reduce the risk of serious 

personal injury.

18 V LITHIUM-ION 
BATTERY PACK

P102 / P105 SERIES

OPERATION

LITHIUM-ION BATTERY PACKS

Lithium-ion batteries deliver fade free power for their entire 
run time. Lithium-ion tools will not gradually lose power 
due to decreasing battery charge. Instead, power from the 
battery pack will drop from full to zero once the full charge 
has been drained from the battery. Once this happens, 
recharging of the battery is required. It is not necessary to 
drain the battery pack completely before recharging.

BATTERY PROTECTION FEATURES

Lithium-ion battery packs are designed with features that 
protect the lithium-ion cells and maximize battery life.
If the tool stops during use, release the trigger to reset and 
resume operation. If the tool still does not work, the battery 
needs to be recharged.

To register your RYOBI product, please visit:  

http://register.ryobitools.com
Use this battery pack for RYOBI ONE+ 18V cordless 

products only. Refer to the Operator’s Manual provided with 

product. Always mention the model number above when 

communicating with us regarding this battery pack.

Отзывы: