Ryobi OCS1825BL, Оригинальное руководство пользователя

Страница: 8 / 32

6
Ŷ
Take frequent work breaks. Limit the amount of
exposure per day.
Ŷ 3URWHFWLYHJORYHVDYDLODEOHIURPSURIHVVLRQDOFKDLQVDZ
retailers are designed specifically for chainsaw use
which give protection, good grip and also reduce the
effect of handle vibration.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
KNOW YOUR PRODUCT
See page 11.
1. Front hand guard/Chain brake
2. Front handle
3. Rear handle
4. Chain
5. Guide bar
6. Spiked bumper
7. Chain lubricant cap
8. Trigger release
9. Throttle trigger
10. Sprocket cover
11. Chain tensioner adjustment ring
12. Chain tensioner knob
13. Guide bar cover
14. Chain catcher
SAFETY DEVICES
Low kickback saw chain
$ORZNLFNEDFNVDZFKDLQKHOSVWRUHGXFHWKHSRVVLELOLW\
of a kickback event.
7KH UDNHUV GHSWK JDXJHV DKHDG RI HDFK FXWWHU FDQ
minimize the force of a kickback reaction by preventing the
cutters from digging in too deeply. Only use replacement
guide bar and chain combinations recommended by the
manufacturer.
As saw chains are sharpened, they lose some of the low
kickback qualities and extra caution is required. For your
safety, replace saw chains when cutting performance
decreases.
Spiked bumper
The integral bumper spike may be used as a pivot when
making a cut. It helps to keep the body of the chainsaw
steady while cutting. When cutting, push the machine
forward until the spikes dig into the edge of the wood, then
by moving the rear handle up or down in the direction of the
cutting line it can help ease the physical strain of cutting
Guide bars
Generally, guide bars with small radius tips have somewhat
lower potential for kickback. You should use a guide bar
and matching chain which is just long enough for the job.
Longer bars increase the risk of loss of control during
sawing. Regularly check the chain tension. When cutting
VPDOOHUEUDQFKHVOHVVWKDQWKHIXOOOHQJWKRIWKHJXLGHEDU
the chain is more likely to be thrown off if the tension is
not correct.
Chain brake
Chain brakes are designed to quickly stop the chain
rotating. When the chain brake lever/hand guard is pushed
towards the bar, the chain should stop immediately. A
chain brake does not prevent kickback. It only lowers the
risk of injury should the chain bar contact the operator’s
body during a kickback event. The chain brake should be
tested before each use for correct operation in both the run
and brake positions.
Chain catcher
A chain catcher prevents the saw chain from being thrown
back towards the operator if the saw chain comes loose
or breaks.
PRODUCT FEATURES
OVERHEAT PROTECTION
The battery pack has overheat protection. Excessive
temperatures will cause the battery to stop powering the
product. Feel the battery pack; if it feels warm or hot it may
have activated the overheat protection system. Allow it to
cool down before resuming operation.
GETTING STARTED
WARNING
If any parts are damaged or missing do not operate this
product until the parts are replaced. Failure to heed this
warning could result in serious personal injury.
ADJUSTING THE CHAIN TENSION
See page 12. See page 23.
1. Loosen the chain tensioner knob slightly by turning it
counterclockwise.
2. To increase the chain tension, turn the chain tensioner
adjustment ring clockwise and check the chain tension
frequently. To reduce the chain tension, turn the chain
tensioner adjustment ring counterclockwise and check
the chain tension frequently.
3. The chain tension is correct when the gap between
WKHGULYHWHHWKDQGWKHEDULVEHWZHHQPPPP
3XOO WKH FKDLQ LQ WKH PLGGOH RI WKH ORZHU VLGH RI WKH
EDUGRZQZDUGVDZD\IURPWKHEDUDQGPHDVXUHWKH
distance between the bar and the drive teeth.
4. Tighten the chain tensioner knob by turning it clockwise.
OPERATION
ADDING CHAIN LUBRICATING OIL
See page 12.