ryan JYCD02, Инструкция по эксплуатации

Страница: 9 / 12

1. Fill solution to the tank and fasten the cap.
2. Choose the right nozzle sizes according to your need.
The nozzle sizes referring to the above parameters sheet.
Fix the nozzle and turn on to spray.
Operation Instructions
1. Malfunction: the machine doesn't work.
Causes
A. plug connection is loosed, bad contact;
Solution: change if it's loose
B. switch damage
Solution: replace with a new one
C. carbon brush wear
Solution: replace with new one. The steps are as followed:
a. Dismantle the series motor from the tagger; do not interfere
with other spare parts.
b. Press the rabbet by screwdriver at the position as illustration.
c. Pull the carbon brush out of the support by long flat nose
piers.
d. Bare the wire of series motor and compress the new carbon
brush with power wire.
e. Put the carbon brush to the motor support, and press the
carbon brush to the bottom.
f. Last step is to fix the series motor back to its original place -
motor case.
Trouble Shooting
06