RWD RWD-MB-001-A, Руководство пользователя, Страница: 6 / 28

1
1-Introduction
1.1 Overview
First of all, thank you for choosing the Microcentrifuge manufactured by RWD.
Before the installation and application of this product for the first time, please
read all attached materials to help you use this product in a better way.
RWD Life Science Co., Ltd. is committed to continually improving product
features and service quality, and reserves the right to make changes to the User
Manual and any product mentioned herein without prior notice.
For the latest product information, please call or write us or visit our website
(http://www.rwdstco.com/). Please contact RWD in the case of any inconsistency
between actual conditions of product and the User Manual, or any question or
suggestion, during your application of equipment.
This User Manual is applicable to the Microcentrifuge produced by RWD:

Microcentrifuge M1324R
1.2 Safety
When operating the system, please read the
“2-System Safety”
section
carefully to avoid hurts to operators and damages to the equipment.
If you have any question or suggestion regarding safety, please contact RWD
for after-sales support.
1.3 Comprehensive description
The Centrifuge is a machine used to separate components in a mixture of
liquid and solid particles or liquids via a centrifugal force generated from uniform
circular motion of liquid samples in the rotor driven by a motor. It is mainly used to
separate solid particles from liquid in suspension or two kinds of liquids with
different density and insoluble with each other in emulsion.
Microcentrifuge is mainly used to process liquid samples with a volume of or
less than 1.5/2 mL and needed to be operated at low temperature. It has a speed over
10,000 r/min.
Such product is applicable to daily needs of molecular biology application in
labs, such as nucleic acid kit extraction and tissue protein separation.
1.4 Product features

Quick precooling. Only take 8 min to lower to 4 °C from room temperature
in order to cut waiting time.

Stable temperature control. Stabilize below 4 °C even at the highest speed to
avoid sample inactivation.
This equipment should be operated and managed by
trained professionals!