manualshive.com logo in svg

Ruwac industriesauger NA 7-26, Инструкция по эксплуатации

Поделиться
Скачать
Ruwac industriesauger NA 7-26 Скачать руководство пользователя страница 37

 Operation

Page 37

8.3

Topping up the sealing liquid

8.4

Changing the filter cartridges

1. Lock the parking brake, see “Applying / releasing the parking 

brake (optional)” on page 36.

2. Pull the vacuum hose off the unfiltered gas connection, 

see “Attaching / detaching the vacuum hose” on page 31.

3. Move the unlocking lever of the liquid container to the left. 

Remove the liquid container from the wet separator, 
see page 30.

4. Remove the moisture separator from the liquid container, 

see page 30.

5. Topping up the sealing liquid.

6. Check the fill level at the viewing window of the liquid 

container. Always fill the sealing liquid up to the fill level max.

7. Place the moisture separator on the liquid container. Insert 

the liquid container in the wet separator and move the 
unlocking lever to the right.

1. The liquid container must be removed from the wet separator 

in order to change the filter cartridges, see page 30.

2. To remove the filter cartridges, press the sprung 

plates together.

3. Pull the filter cartridges up and take them out.

Содержание NA 7-26

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды