Ruwac industriesauger NA 7-26, Инструкция по эксплуатации

Страница: 28 / 64

Transport
Page 28
5 Transport
The following points must be satisfied for transport:
 The wet separator may be transported only when it is empty
and has been cleaned.
 Ensure that no dust or liquids escape from the wet separator
during transport.
 Ensure that no dust escapes from the hoses during transport.

During transport by a vehicle the wet separator must be
secured to prevent sliding and tipping.

The mains connection plugs must be removed from the wet
separator before transport. The power supply cable must be
wound up before transport.
DANGER
Risk of injury if struck or crushed while lifting or
transporting the wet separator.

Transport must only be performed by appropriately
instructed personnel.

Always stay a safe distance from the components whilst they
are being lifted.

No-one may stand on components whilst they are being
transported.

It is forbidden to stand under suspended loads.
The minimum lifting load of the lifting equipment must
always be greater than the weight of the component to
be lifted.