5
Fig 2. Mounting instructions for LED spotlight with motion detector
6. ADJUSTING A SPOTLIGHT WITH MOVEMENT DETECTOR (PIR)
NOTE! Never try to detach the IR detector lens cover, as this will damage the IR detector
and void the warranty.
• Loosen the adjustment screw to angle the PIR sensor up or down. You can change the
selected detector range by changing the angle of the swivel hinge.
6.1 Adjusting the distance sensitivity – SENS
• The sensitivity refers to the maximum distance at which the PIR sensor can be trig-
gered by a moving body.
• Turn the SENS control from (+) to (-) to reduce sensitivity.
• Detection distance: min 1 – max 12 m.
6.2 Adjusting the time – TIME
• How long the light stays on can be adjusted from 10±5 seconds to 10±2 minutes.
• Adjust how long the light stays on by turning the TIME control towards plus (+) or
minus (-).
6.3 Adjusting the light sensitivity – LUX
• You can adjust whether the light will turn on during daytime by turning the LUX control
towards the sun, or just in the evening by turning it towards the moon.
• The sun indicates that PIR is set to work during both daytime and the evening.
The moon indicates that the light will only come on when it is dark outside.
Fig 3. Adjustment screws
M
in 1
5 c
m
