INTRODUCTION
The SRC2 Remote Control is the complete solution for all of
your remote control requirements. It is designed to operate
source devices and Russound audio system keypads. The
SRC2 controls up to eight devices. For best results, please
read and follow all the remaining instructions and keep this
guide for future reference.
FEATURES AND FUNCTIONS
NOTE: key functions may vary from device to
device. The following Key Chart provides a general
description of functions.
Select a local device.
Activates control of Russound
system controller and keypads,
and its connected sources.
Use these keys to
select specific
sources.
Turn the selected device on or off.
Program sequences.
Select next/previous.
Select the next/previous chapter on some
models of DVD players.
Press LAST to recall the last-viewed
channel.
Raise or lower the sound level.
Press MUTE to turn the sound off or on.
Move the cursor in the menu screens.
Press OK to choose the high
lighted menu option. May perform “Enter”
function for devices.
Press Enter to choose the highlighted
menu option. May perform “OK” function
for devices.
Skip backward, rewind, fast
forward, skip forward, stop
pause, or play tracks on disc.
Use Page Up/Down with cable or
satellite boxes. Note: May have to
learn in these functions.
View the current channel and
program information.
Display the menu for the selected device.
Exit the selected device’s menu, guide, or
program without making a menu selection.
Display the program guide for the selected
device.
Switch the TV’s,VCR’s, SAT’s or DVD’s
input to view TV or video programs.
Direct disc selection.
Press LAST once to recall the last channel;
page back one screen in the main menu.
Select and save favorite presets.
Directly enter channels (e.g.,
09 or 31). Press OK to send
channel number entries on
some TV models.
INSTALLING BATTERIES
1. On the back of the SRC2, push the tab and lift off
the battery cover.
2. Obtain two (2) fully-charged AA alkaline bat-
teries. Match the + and – marks on the batter-
ies to the + and – marks in the battery case,
then insert the new batteries.
3. Press the battery cover back into place. The tab
should click when the cover is locked.
4. Test the unit by pressing Power and any mode
key. If the batteries are inserted correctly, the
LED will blink once.
PROGRAMMING A DEVICE
To control Universal TV,VCR or DVD, Cable or
Satellite Receivers,Amplifier or tuner, and Auxiliary
devices, follow these steps.
Before proceeding, find the codes for the devices you
want to program in “Manufacturer’s Codes” in this
manual.
1.
Turn on the device (e.g., DVD player) and if
needed, load media.
2.
Press a device key.
3.
Press and hold SET until the red LED blinks
twice, then release.
4.
Enter the first five-digit code for your device.
The LED blinks once as each digit is entered. If the
code is correct, the LED blinks twice.
Note: If the LED does not blink twice, repeat step 4
and try entering the code again.
5.
Aim the remote at the device and press
POWER. The device should turn off. If it does not,
repeat steps 3-5, trying each code for your brand
until you find one that works. If you cannot find a
code that works see “Searching for Your Code” in this
manual.
6.
Repeat steps 1-5 for the other devices you
want to control. For future reference, write down
each working device code.
SEARCHING FOR YOUR CODE
If your device does not respond to the remote after
trying all codes listed for our brand, or if your brand
is not listed, try searching for your code:
1.
Press a device key once.
2.
Press and hold SET until the red LED blinks
twice, then release.
3.
Enter 9-9-1, then the device group number
(see below). The LED blinks twice.
0
Cable (Cable Converters,
Video Accessories, Satellite
Receivers)
1
TV (TVs)
2
VCR (VCRs, DVD players)
3
Audio (Audio Amplifiers,
Audio Amp/Tuners,
CD players)
4.
Aim the remote at the device and press
POWER. The remote sends IR codes from its library
to the selected device, starting with the most popu-
lar code first. If the device responds, go to step 6.
5.
If the device does not respond, press CH+. the
remote will try the next code. Continue until the
device responds. Press CH- to try the previous code.
6.
Press SET to lock in code. To search for other
device codes, repeat steps 1-5.
CHECKING THE CODES
If you have set up the remote using the procedure in
“Searching for Your Code,” you may need to find out
which five-digit code is operating your equipment.
For example, to find out which code is assigned to
your TV:
1.
Press the key to which the TV is assigned.
2.
Press and hold SET until the red LED blinks
twice, then release.
3.
Enter 9 9 0. The LED blinks twice.
4.
To view the code’s first digit, press 1. Count the
LED blinks (e.g., three blinks =3), and enter the
number in the appropriate device list in step 8 of
“Programming a Device.” If a code digit is 0, the
LED does not blink.
5.
Repeat step 4 for the remaining digits, using 2
for the second digit, and so on.
6.
To check for other device codes, repeat
steps 1-5, using the appropriate key.
CHANGING VOLUME LOCK
The SRC2 remote comes preset to allow independent
volume control of each selected device (Global
Volume Unlock). However, you may change the
Volume Lock setting to Global Volume Lock so that
one device’s volume will control volume in all other
modes.After that , you can perform Individual
Volume Unlock on a selected device to set its volume
control for independent operation or Global Volume
Unlock to remove all volume locking.
Locking Volume Control to One Mode (Global Volume
Lock)
1.
Press and hold SET until the red LED blinks
twice, then release.
2.
Enter 9 9 3 and then press the mode key for
the device you want to control volume (e.g., TV).
The LED blinks twice. Now when you press VOL+,
VOL-, or Mute, the selected device will control the
volume regardless of the current mode.
Unlocking All Volume Control (Restoring Global Unlock)
1.
Press and hold SET until the red LED blinks
twice, then release.
2.
Enter 9 9 3 and then press VOL+. The LED
blinks four times.Volume is independently con-
trolled for all programmed devices.
Unlocking a Single Device’s Volume Control
1.
Press a device key (VID, DVD, etc.).
2.
Press and hold SET until the red LED blinks
twice, then release.
3.
Enter 9 9 3 and then press VOL-. The LED
blinks four times.Volume is independently con-
trolled for the selected devices.
USING LEARNING
The SRC2 includes a Learning feature so you can
add functions that are unique to your home enter-
tainment devices (e.g.,VCR Tracking Up or Down).
The following precautions apply.
• The original remote controls must be in working
order for learning to work properly.
• Learned keys are mode specific, so each one can
store a unique function for each mode.
• Do not use the following keys for learning: Device
Keys, SET, Back, or Record.
• Learning capacity is approximately 40 to 100 keys,
depending on the code being learned.
• Certain device codes are not learnable including
multi-frequency types, some high frequency ones,
and other unusual formats.
• For optimum learning, avoid high levels of ambient
light such as natural sunlight or energy-efficient flu-
orescent lights.
• Have the original remote controls handy before
programming learning.
Programming a learned key
Note: If more than 15 seconds pass between key
presses, the remote exits programming.
1.
Press and hold SET until LED flashes twice.
2.
Press 9 7 5.
3.
Press a device key once to assign a mode for learning.
4.
Place the SRC2 head-to-head (about 2” apart)
from your original remote control.Also locate the
key (on original remote control) that will serve as
the teaching function.
5.
On the SRC2, press a key where the learned
function will be stored.
6.
On the original remote, press and hold the the
key to be learned. The SRC2 LED will turn off.
Continue holding the key on the original remote
until the SRC2 LED blinks twice.
Note: If the LED displays one long blink, a learning
error has occurred. Try repeating this step again
until a successful capture occurs. If the function is
still not captured, press and hold SET to exit pro-
gramming. Review the learning precautions listed
above, or the Troubleshooting tips below, before
beginning again at step 1.
7.
Repeat steps 4-6 for another key on same
device, or repeat steps 1-6 for another device.
Deleting a single learning key
1.
Select a source
2.
Press and hold SET until the LED flashes twice.
NOTE: If more than 15 seconds passes between key
presses, the remote exits programming.
3.
Press 9 7 6.
4.
Press the key (twice) containing the learned
function to be deleted. The remote blinks twice.
5.
Repeat steps 1-4 for another key on the same
source, or press and hold SET to exit programming.
Deleting all learned keys in a specific mode
1.
Press and hold SET until the LED blinks twice.
Note: If more than 15 seconds pass between key
presses, the remote exits programming.
2.
Press 9 7 6.
3.
Press a device key twice to delete all the
learned keys for that mode. The LED blinks twice.
4.
Repeat steps 1-3 for another set of keys for a
device, or press and hold SET to exit programming.
TROUBLESHOOTING
Problem:
LED does not blink when you press a key.
Solution:
Replace battery with two new AA batteries.
Problem:
LED blinks when you repress a key, but
device does not respond.
Solution:
Make sure the remote is aimed at your
device or system keypad and is not more than 15
feet away.
Problem:
LED blinks one long blink.
Solution:
An entry error has occurred (e.g., wrong
key). Try entry sequence again.
Problem:
Remote does not control devices or com-
mands are not working properly.
Solutions:
Try all listed codes for the device. Make
sure the device operates with an infrared remote
control.
Problem:
CH+, CH- and LAST do not work for your
RCA TV.
Solution:
Due to RCA design from 1983 to 1987, only
the original remote control will operate these func-
tion.
Problem:
Channels do not change properly.
Solution:
If the original remote control required you
to press ENTER to change channels., press enter on
this remote after entering the channel number.
ADDITIONAL INFORMATION
The SRC2 does not have any user-serviceable
parts. Opening the case, except for the battery
cover, may cause permanent damage to the
SRC2.
Copyright ©2005 Russound, Inc.
Russound, 5 Forbes Road,
Newmarket, NH 03857
603.659-5170 www.russound.com
28-1206 REV. 1 11/30/05
MANUFACTURER’S CODES
Setup Codes for Audio Amplifiers
Bose 30674
GE
30078
JVC 30331
Marantz 30321
Nakamichi
30321
NEC
30264
Optimus
30395
Realistic
30395
Sansui
30321
Shure
30264
Sony
30689
Soundesign
30078
Victor
30331
Wards
30078
Yamaha
30354, 30133
Setup Codes for Audio Amp/Tuners
ADC
30531
Aiwa
31405, 31243, 30121
Anam
31609, 31074
Audiotronic
31189
Bose
31229
Capetronic
30531
Carver
31189
Coby
31263
Denon
31360, 31142, 30904
Fonmix
31360
Glory Horse
31263
Harman/Kardon 30110
Hitachi 31273
Inkel
30027
Integra
30135
JBL
30110
JVC
30074, 31263
Kenwood
31313, 31570, 30027
KLH
31428
Magnavox
31189, 31269, 30531
Marantz
31189, 31269, 30039
MCS 30039
Onkyo
30842, 30135
Optimus
31023, 30670, 30531, 31074
Panasonic
31518, 30039
Philips
31189, 31269
Pioneer
31023, 30150, 30014, 30630, 30531
Proscan
31254
Qisheng
31609
Quasar
30039
RadioShack
31263
RCA
31023, 31609, 31254, 30531, 31074
Sharper Image
31263
Silsonic
30176
Sony
31058, 31441, 31258, 31759
Soundesign
30670
Stereophonics
31023
Sunfire
31313
Teac
31074, 31267
Technics
31308, 31518, 30039
Thorens
31189
Victor
30074
Wards
30014
Yamaha
30176, 31276, 31176
Setup Codes for Cable Converters
ABC
00003, 00008, 00014
Americast
00899
Bell & Howell
00014
Bell South
00899
Clearmaster
00883
ClearMax
00883
Coolmax
00883
Daeryung
01877, 00877, 00477, 00008
Digi 00637
Director
00476
Dumont
00637
Gehua
00476
General Instrument00476, 00810, 00276, 00003, 00014
GoldStar
00144
Hamli
00009, 00273
Hitachi 00014
Jerrold
00476, 00810, 00276, 00003, 00012,
00014
KNC
00008
LG 00144
Memorex
00000
Motorola
00476, 00810, 00276, 01254, 01376
MultiVision
00012
Pace
01877, 00237
Panasonic
00000, 00008, 00107
Panther
00637
Paragon
00000
Philips
00317, 01305
Pioneer
01877, 00877, 00144, 00533
Pulsar
00000
Quasar 00000
RadioShack
00883
Regal
00279, 00273
Runco
00000
Samsung
00000, 00144
Scientific Atlanta 01877, 00877, 00477, 00008
Sony 01006
Starcom
00003, 00014
Supercable
00276
Supermax
00883
Tocom
00012
Torx 00003
Toshiba
00000
Trans PX
00276
Tristar
00883
TS
00003
V2
00883
Viewmaster
00883
Vision
00883
Vortex View
00883
Zenith
00000, 00525, 00899
Setup Codes for CD Players
Aiwa 30157
Burmester 30420
California Audio Labs30029
Carver
30157, 30179
Denon
30873
DKK
30000
DMX Electronics 30157
Dynamic Bass
30179
Fisher
30179
Garrard
30420
Genexxa
30032
Harman/Kardon 30157, 30173
Hitachi
30032
Integra
30101
JVC
30072
Kenwood
30826, 30626, 30028, 30037, 30036,
30190
Krell
30157
Linn 30157
Magnavox
30157
Marantz
30626, 30029, 30157
MCS
30029
Miro 30000
Mission
30157
MTC
30420
NSM
30157
Onkyo
30868, 30101
Optimus
31063, 30000, 30032, 30037, 30420,
30179, 31075, 30145
Panasonic 30029
Parasound 30420
Philips
30626, 30157
Pioneer
31063, 31062, 30032
Polk Audio
30157
Proton
30157
QED
30157
Quad 30157
Quasar
30029
RadioShack
31075
RCA
31062, 30032, 30420, 30179, 30053
Realistic 30420, 30179
Rotel
30157, 30420
SAE
30157
Sansui
30157
Sanyo
30179
SAST 30157
Sharp
30861, 30037
Silsonic
30888, 30036
Sonic Frontiers
30157
Sony 30490, 30000, 30100
Soundesign
30145
TAG McLaren
30157
Tascam
30420
Teac 30420
Technics
30029
Victor
30072
Wards
30157, 30053
Yamaha
30888, 30036
Zonda
30157
Setup Codes for DVD Players
Aiwa 20641, 21912
Akai 20770
Allegro
20869
Apex Digital
20672, 20717, 20797, 21061, 20796,
21056, 21937, 20794, 21020, 21915
Blaupunkt 20717
Blue Parade
20571
Broksonic 20695
Changhong 20627, 21061
CineVision
20869
Coby 21086
Curtis Mathes
21087
CyberHome 21024, 21023, 21129, 20816, 21117
Daewoo
20833, 21172, 20869
Denon
20490
DVD2000
20521
Emerson
20591, 20675
Enterprise
20591
Fisher
21919
Funai
20675
Gateway
21158, 21073
GE
20522, 20717
Go Video
20744, 20833, 21099, 20783, 21075,
20869, 21730
Greenhill 20717
Harman/Kardon 20582, 20702
Hitachi
20573, 20664, 21919
Hiteker
20672
Initial
20717
Integra
20627, 21924
JBL
20702
JVC
20558, 20623, 20867
Kenwood
20490, 20534
KLH
20717, 21020, 21149
Koss 20651, 21980
Lasonic
20798
LG
20591, 20869, 20801
Liquid Video
21980
Lite-On
21158, 21058
Loewe
20511
Magnavox
20503, 20539, 21976, 21914, 20675
Marantz
20539
Memorex
20695
Microsoft 20522
Mintek
20717
Mitsubishi
21521, 20521
Nesa 20717
Norcent
21003
Onkyo
20503, 20627, 21924, 20792
Oritron
20651, 21980
Panasonic 20490, 21762, 21990
Philips
20503, 20539, 20646, 21914
Pioneer
20525, 20571
Polaroid
21086, 21061
Polk Audio
20539
Portland
20770
Proscan
20522
Qwestar
20651
RCA
20522, 20571, 20717, 20822
Rio
20869
Rotel
20623
Sampo
20752, 20698
Samsung
20490, 20573, 21932, 21075, 20820
Sansui
20695
Sanyo
20695
Sharp
20630, 20752
Sharper Image
21117
Sherwood
20770
Shinco
20717
Shinsonic 20533
Sonic Blue
20869, 21099
Sony 20533, 20864, 21033, 21904, 21903
SVA
20717
Sylvania
20675
Symphonic 20675
Teac 20717, 21984, 20809
Technics
20490
Theta Digital
20571
Toshiba
20503, 20695
Urban Concepts 20503
Xbox 20522
Yamaha
20490, 20539, 20545
Zenith
20503, 20591, 20869
Setup Codes for Satellite Receivers
AlphaStar 00772
Chaparral 00216
Crossdigital
01109
DirecTV
00392, 00566, 00639, 01142, 00247,
00749, 01749, 00724, 00819, 01856,
01076, 01109, 00099, 01392, 01640,
01442, 01414, 01108
Dish Network System 01005, 00775, 01505
Dishpro
01005, 00775, 01505
Echostar 01005, 00775, 01505
Expressvu 00775
GE
00566
General Instrument 00869
GOI 00775
Goodmans
01246
Hisense
01535
Hitachi
00819, 00222, 01250
HTS 00775
Hughes Network Systems 01142, 00749, 01749, 01442
I-Lo 01535
JVC
00775
LG
01414, 01226
Magnavox
00724, 00722
Memorex
00724
Mitsubishi
00749
Motorola
00869
NEC 01270
Next Level
00869
Panasonic 00247, 00701
Paysat
00724
Philips
01142, 00749, 01749, 00724, 01076,
00722, 00099, 01442
Proscan
00392, 00566
Proton
01535
RadioShack
00869
RCA
00392, 00566, 00855, 00143, 01392
Samsung
01276, 01109, 01108
Sanyo
01219
SKY
00856
Sony 00639, 01640
Star Choice
00869
Tivo 01142, 01442
Toshiba
00749, 01749, 00790, 01285
UltimateTV
01640, 01392
Uniden
00724, 00722
US Digital
01535
USDTV
01535
Voom 00869
Zenith
00856, 01856
Setup Codes for TVs
Addison
10092
Admiral
10093, 10463
Advent
10761, 10842
Aiko 10092
Aiwa 11914
Akai 10812, 10702, 10030, 10672, 11903
Albatron
10700, 10843
America Action
10180
Anam 10250, 10180, 10700
Anam National 10250, 10650
Anhua1
0051
AOC
10451, 10093, 10180, 10060, 10030,
10178, 10092
Apex Digital
10748, 10765, 10879, 10767, 11943
Audiovox
10451, 10180, 10875, 10092, 10623
Baile
10661
Beijing
10812, 10661
Bell & Howell
10154
BenQ 11032
Bradford
10180
Broksonic 10236, 10463, 11911, 11938, 11905,
11935, 11929
Cailing
10748
Candle
10030
Carnivale 10030
Carver
10054
Celebrity 10000
Celera
10765
Changcheng
10051, 10661
Changhong 10156, 10765, 11156, 10767
Ching Tai
10092
Chun Yun
10000, 10180, 10700, 10092, 10843
Chung Hsin
10180, 10053
Cinema
10672
Citizen
10060, 10030, 11928, 10092
Clarion
10180
Commercial Solutions11447, 10047
Conrowa
10156, 10145, 11156
Contec
10180
Craig
10180
Crosley
10054
Crown
10180
Curtis Mathes
10047, 10054, 10154, 10451, 10093,
10060, 10702, 10030, 10145, 10166
CXC
10180
Daewoo
10154, 10451, 10180, 10030, 10178,
10672, 11928, 10092, 10661, 11909,
10623, 10700
Dayu 10661
Dell 11080
Denon
10145
Dumont
10017
Durabrand 10463, 10180, 10178, 10171, 11034
Electroband
10000
Emerson
10154, 10236, 10463, 10180, 10178,
10171, 11944, 11909, 11929, 11905,
11928, 10623, 11911
Envision
10030
Ether
10030
Firstar
10236
Fisher
10154
Fortress
10093
Fujitsu
10809, 10853
Funai
10180, 10171, 11904
Furi 10145
Futuretech
10180
Gateway
11756, 11755
GE
11447, 10047, 11454, 10051, 10451,
10180, 10030, 10178, 11917, 10092,
11907, 11922
Gibralter 10017, 10030
GoldStar
10154, 10030, 10178, 11926
Grunpy
10180
Haier
11034
Hallmark
10178
Hankook
10180, 10030, 10178
Harley Davidson 11904
Harman/Kardon 10054
Harvard
10180
Havermy
10093
Helios
10865
Hello Kitty
10451
Hisense
10156, 10748, 10145, 11156
Hitachi
10156, 10030, 10178, 11145, 10145,
10092, 11904, 11156
Hongmei
10093
Huafa
10145
Huari
10145
Huodateji 10051
Imperial Crown 10661
Infinity
10054
Inteq
10017
JBL
10054
JCB
10000
Jean 10156, 10051, 10236, 10092
Jensen
10761
Jiahua
10051
Jinfeng
10051
Jinxing
10054, 10156, 10145
JVC
10053, 11923, 11253
Kangli
10661
SRC2
ADVANCED LEARNING &
PRE-PROGRAMMED REMOTE CONTROL
USER GUIDE
