5 Forbes Rd. Newmarket, NH 03857, USA
Tel 603.659.5170 • Fax 603.659.5388
e-mail: [email protected]
LIMITED WARRANTY
The Russound
®
SaphIR 862 Eye is fully guaranteed for Two (2) years from the date of purchase against
all defects in materials and workmanship. During this period Russound will replace any defective parts
and correct any defect in workmanship without charge for either parts or labor. For this warranty to
apply, the unit must be installed and used according to its written instructions. If service is necessary, it
must be performed by Russound. The unit must be returned to Russound at the owner’s expense and
with prior written permission. Accidental damage and shipping damage are not considered defects
under the terms of the warranty. Russound assumes no responsibility for defects resulting from abuse
or servicing performed by an agency or person not specifically authorized in writing by Russound.
Damage to or destruction of components due to improper use voids the warranty. In these cases the
repair will be made at the owner’s expense. To return for repairs, the unit must be shipped to Russound
at the owner’s expense, along with a note explaining the nature of the service required.
Be sure to pack in a corrugated container with at least 3 inches of resilient material to protect the unit
from damage in transit.
Russound sells products only through authorized Dealers and Distributors to ensure that customers
obtain proper support and service. Any russound product purchased from an unauthorized dealer or
other source, including retailers, mail order sellers and online sellers will not be honored or serviced
under existing Russound warranty policy. Any sale of products by an unauthorized source or other
manner not authorized by Russound shall void the warranty on the applicable product.
PRODUCT OVERVIEW
The SaphIR862 Eye r
eceives IR signals from a handheld IR r
emote control
and relays these signals to the audio/video equipment for oper
ation from
another room. It mounts thr
ough a circular hole with a diameter of 0.5”, a
minimum clearance of 2.0” behind the face of the mounting panel, and will
mount in a panel with a maximum thickness of 1.75” .
FEATURES
•Comes with inter
changeable white, black and brass bezels to easily
customize your installation.
•CFL friendly - allows installations in ar
eas with compact fluorescent
lighting. Works in most lighting envir
onments.
•Blue IR
confirmation LED.
•Can easily be mounted in many in-wall speaker
s (such as Russound
Advantage® and Atmosphere) and custom cabinets.
•Wide band IR. Receives IR fr
om many types of remotes.
BEZEL EXCHANGE
The SaphIR 862 Eye comes with three bezels (white, black, br
ass) for more
installation color choices.
To r
emove the bezel, hold the barr
el steady and twist the bezel until it clears
the top of the barrel. Make sur
e the small clear dust cover stays in place at
the end of the barrel.
To r
eplace the bezel, center the bezel over the dust cover and barrel, thr
ead
onto the barrel end and twist until snug. The hole in the dust cover should
line up with the offset sensor at the top of the receiver
.
Dust Cover
Bezel
Nut
Barrel
INSTALLA
TION
The SaphIR 862 Eye is installed into a circular hole 0.5” in diameter
. Remove
the nut from the r
eceiver’s barr
el. Insert the Eye (wire end fir
st) until the
bezel is flush with the surface. Rethread the nut onto the barr
el until it is
snug against the rear of the mounting surface. If necessary
, use one or both
of the included washers for a mor
e secure installation into soft or thin
materials.
Mounting
Surface
Front
Mounting
Surface
Rear
Washer
08/12/04
Max thickness
1.75”
Min. clearance
2.0”
SaphIR
862 Eye
Mini Infrared Receiver
CFL Friendly
Instruction Manual
Panel
Face
