IPK-1 INSTALLATION
IPK-1 INSTALLATION
Installation
1) Insert the CAT5 PoE cable that is connected
to the same network as your Russound
system into the rear of the IPK-1. The IPK-1
will power on and automatically look for
and install any available firmware updates.
When ready for configuration, the status
LED will blink yellow.
2) Using the supplied screws, attach the IPK-1
securely to the wall box or P-ring. Attach
the appropriate Decora® wall-plate to the
front of the IPK-1. The wall-plate is NOT
included and must be purchased separately.
Wall
Single gang
electrical box
CAT-5
Mounting bracket
Screws
