Ruris DAC 110XL, Руководство пользователя

Страница: 93 / 172

EN
17
4. The oil can reach the air filter
Fuel recommendations :
Use clean, fresh, unleaded gasoline.
Do not mix the oil with gasoline.
Check the fuel level.
Before refueling, allow the engine to cool for 2 minutes, clean around the filling hole
before removing the tank cap.
10. PROBLEM GUIDE
Problems Cause Remedies
The engine
does not
start ○ The stop handle of the knife is
disconnected
○ Spark plug disconnected
○ Deregulated accelerator cable
○ The tank is empty or the fuel
is obsolete
○ Gasoline flap blocked
○ Spark plug or defective spark
plug
○ Motor drowned
○ Tighten the stop handle of the knife
○ Connect the spark plug sheet
○ Check the cable source
○ Fill the tank or change the fuel
○ Clean the gas flap
○ Clean the holes or change the plug
or spark plug
○ Ventilate the combustion chamber
The engine
operates with
speed
fluctuations ○ The Machine goes to the
starting position
○ Ignition interrupted
○ Locked petrol valve or
obsolete fuel
○ Water or fuel mess
○ Clogged air filter
○ Machineburetor deregulated
○ Change gear quickly (fast)
○ Connect and tighten the spark plug
○ Clean the valve and fill the tank
with fuel
○ Empty the tank and replace the fuel
○ Clean the air filter or replace it.
○ Adjust the Machineburetor
Overheated
engine ○ Engine oil below level
○ Small air circulation
○ Machineburetor not regulated
well
○ Change the oil or fill it out
○ Clean the cooling spaces
○ Adjust the Machineburetor
Motor speed
interruptionsr
at high
speeds ○ Clogged Machineburetor
○ Defective spark plug
○ Spark plug or faulty cable ○ Clean the Machineburetor
○ Replace the spark plug
○ Replace the sheet or ignition
Excessive
vibrations ○ Loose cutting knife or
unbalanced Machine
○ Tighten the adapter knife. Check
the balance of the knife.
Change the knife.