2.
+
6
x 1
1
x 1
x 1
x 2
x 1
mm
4
M3
M6
1
2
3
5
1
.
a)
b)
7
8
9
※
2S
1
a)
b)
2S
b)
a)
+
-
Black wire
Battery
Red wire
12V
ＭＡＤＥ ＩＮ ＣＨＩＮＡ
Multifunctional hour meter
Please read and understand following notice carefully, and correctly install and operate the
product before using.
Notice
1.Please use the product accordance with the user manual strictly.
2.Please do not try to disassemble the main unit and its accessories.
3.This meter or in the heavy rain can not be used underwater.
4.Fierce vibration and strong impact may make the product failure.
5.Incorrect installation of battery cover at the back side will make the front panel of main unit
fogged, condensed or watered.
6.Little error will be happened when measuring, within the normal range.
7.Installation needed professional , otherwise easily get an electric shock.
Product accessories list
Product
User manual
Zip ties
Screw fittings
Sensor Components
Dimension
Unit:
Installation
Remark: 3 different installation methods are available for the product. Please use any one of the 3 installation
methods as per users’ needs.
Double-sided adhesive
tape installation
Screws installation
Remark: Mounting plate should have the related fixing holes. If no, please make the fixing holes on the mounting plate.
Aluminium alloy mounting bracket installation
Remarks: When users need aluminium
alloy mounting bracket, please purchase
it separately.
Components installation
Input the power to product correctly.
According to the below picture to wrap the yellow cable to engine’s spark plug wires 5circles or
more, and fixed by zip ties.（Remark : If the cable is not be fixed firmly, it will affect the accuracy
of the test data.）
Connect the terminals of product to the cable components.
Yellow cable
Plug wire
Ignition coils
5-10arounds, fixed by zip
ties after warp.
Verify the accuracy of the product installation
Temperature interface will display current temperature, start the engine, RPM interface display RPM,
which means the correct installation.
Region definition
In the non-setting mode, short press to view
menu interface, long press for 2S into setting
status. In the setting status, decrease the value.
Long press for 2S to save the data.
button
button
button
Switch the main interfaces, increase the value when setting
Temperature icon
Warning light
Timing light
Button operation explanation
Button name
Short press
Long press
Menu button
Setting button
View the submenu interface, decrease the value when setting
Switch the main interfaces or return to main interface, increase
the value when setting
Get into setting mode, quickly decrease the value when setting
Quickly increase the value when setting
In the setting mode, long press M+S to save and exit setting
Interface switching
In the non-setting mode to press “ ” to switch the interface
Temperature interface
RPM interface
Timing interface
Product
operation
Temperature interface operation-------real-time display current temperature
Standby interface
Not connect to sensor, it will display “Err”, connect to the sensor, it will display the
current temperature
Short press
Short press
View the high temperature value
Setting the high temperature value, value flashing.
Long press
Long press
View the max temperature
Reset the max temperature value
Default high temperature reminder value is 100℃（212℉），
setting range：-40℃-+ 300℃（-40℉-+572℉)
When the measuring temperature exceeds the high temperature
reminder value, warning icon flashing, at the same time, the
measuring temperature value displays 3S and flashes 2S to remind
the high temperature, setting value will be saved after cut off the
power.
After resetting, max temperature value will be return to
default -40℃(-40℉)
When the temperature value exceeds the history recorded
value 2 times continuously, max temperature value will be
refreshed.
Mounting plate
