V2.3
RUNGU Juggernaut User Manual
–
2020 model year
Copyright 2017 Standard Bearer Machines, LLC
47
How to replace the rear wheel
1.
If you have the microSHIFT Advent derailleur, make sure that the derailleur clutch switch is OFF.
Regardless the derailleur, make sure that the derailleur is shifted into 9
th
gear. Lift the rear of
the frame and position the rear wheel underneath and pull back on the derailleur so you can
orient the chain around 9
th
gear on the cassette.
2.
Remove any support for the frame and lower the frame so the axle of the wheel moves up into
the dropouts. Take care to slide the brake rotor between the brake caliper pads on the left side
of the bike.
