Runco Video Xtreme CineWide VX-3000d, Руководство по эксплуатации

Страница: 67 / 114

VX-3000 Installation/Operation Manual 53
PRE
L
IMINAR
Y
4.1
Selecting Video
Memory • Press the CUST1 or CUST2 button on the
remote control to recall settings for the current
input from the “Custom 1” or “Custom 2”
memory preset.
• Press ISF NIGHT to recall settings for the current input from the “ISF Night” memory
preset.
• Press ISF DAY to recall settings for the current input from the “ISF Day” memory
preset.
4.2
Selecting an Aspect
Ratio Use these buttons to select the appropriate
aspect ratio for the type of program material being
viewed. For more information on aspect ratios,
refer to Table 4-1.
4.3
Adjusting the Picture • Press the BRT button on the remote control to
adjust the image brightness.
• Press CONT to adjust the image contrast.
• Press COL to adjust the image color level.
• Press TINT to adjust the hue of the image.
For more information about these controls, refer to Picture Adjust on page 56.
4.4
Selecting An Input
Source When you turn on the VX-3000, it switches to the
last selected input and looks for a valid signal.
Use these buttons on the remote control to select
an input source directly.
4. Operation
CUST1 CUST2
ISF
DAY
ISF
NIGHT
16 : 9
VWIDE
LBOX
4 : 3
CINEMA VCINE
2 1
BRT CONT COL TINT
VID S-VID COMP1
HDMI RGB
INFO RVR
HDMI 2
COMP2