Runco NLMP22109, Руководство по установке и эксплуатации, Страница: 26 / 88

12 Runco VX-22i Installation/Operation Manual
PRE
L
IMINAR
Y
6. Memory Pre s et Button s :
CU S T1
Press to recall settings for the current input from the “Custom 1” memory preset.
I S F NIGHT
Press to recall settings for the current input from the “ISF Night” memory preset.
I S F DAY
Press to recall settings for the current input from the “ISF Day” memory preset.
CU S T2 (THX)
Press to recall settings for the current input from the “THX” memory preset.
7. A s pect Ratio S election Button s
Use these buttons to select an aspect ratio directly, as follows:
16:9
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.
4:3
Scales the input signal to fit 4:3 display mode in the center of the screen.
LBOX (Letterbox)
For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen.
VWIDE (VirtualWide)
Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.
CINEMA
For viewing 2.35:1 source material.
VCINE (Virtual Cinema – CineWide-equipped projector s only)
Selects the Virtual Cinema aspect ratio, used for viewing 16:9 source material on a
2.35:1 screen.
8. 0 - 9
Use these keys to enter numeric characters.
9. Motorized Len s Control s :
FOCU S
To focus the image, press FOCU S . Then, press and hold the UP or DOWN button.
When finished, press MENU or EXIT .
ZOOM
To adjust the projected image size, press ZOOM . Then, press and hold the UP
button to zoom in (enlarge) or the DOWN button to zoom out (reduce). When finished,
press MENU or EXIT .
LEN S (Len s S hift)
To adjust the lens position, press LEN S . Then, press and hold the RIGHT, LEFT, UP
or DOWN button. When finished, press MENU or EXIT .