RUMBLE HOG RH7500, Руководство по эксплуатации

Страница: 91 / 164

91
Section 3 - operation
3.12 wireless remote control
Trucks W/O Optional Continuous Off-Loading
The top two buttons on the wireless remote are
programmed to raise or lower the skip cylinders.
The control allows an assistant located within 25
feet (7.5 meters) of the truck to momentarily
raise cutting drum from the pavement to cause
a manual skip, then lower the drum to resume
cutting operations.
This is useful when crossing intersections, drive-
ways or obstructions where rumble strips or plan-
ing operations are not wanted and it is difficult for
the operator to determine exactly when to stop
and restart the rumble strips.
Only the top two buttons are active on the con-
trol transmitter. The other six buttons are not
programed.
Use the following procedure to active the skip
function with the wireless remote.
1. Press any button to wake up the control.
2. Press and hold either button to activate the
skip cylinders and raise the cutting drum off
the pavement and stop cutting.
3. Release the buttons to lower the cutter to the
pavement and resume cutting operations.
Trucks With Optional Continuous Off-Loading
The top buttons wireless remote are programmed
to raise or lower the skip cylinders. The next four
buttons raise or lower the primary and secondary
hydraulic cylinders that raise and lower the auger.
The bottom two buttons control the hydraulic mo-
tor that rotates the auger right and left.
The control allows an assistant located within 25
feet (7.5 meters) of the truck to raise cutting drum
to skip rumble strips or interrupt planing, and to
adjust the position of the auger.
Wireless Remote Control & Skip Cylinder Buttons
1 2
3
4
6 5
7 8