RUMBLE HOG RH7500, Руководство по эксплуатации

Страница: 56 / 164

56 56
Section 2 - Rumble Hog Systems
2.15 System controls
Overview
All features and functions of the cutter and hy-
drostatic drive system are controlled in the cab by
soft keys and touch screen buttons in the digital
controller, or by soft key buttons, dials and switches
in the joystick panels or by the joystick.
LED lights in each joystick panel button illuminate
to indicate the status of the function activated by
the button. All soft key buttons in the joystick panel
and digital controller send low voltage signals to
logic controllers which interpret the command then
activate relays in the outside terminal box (OTB),
hydraulic manifold or near the component that
engage the circuit to activate the function the soft
Typical Rumble Hog Digital Controller - MAIN Screen
Note: The controller display shown in this picture is for demonstration purposes only. The display and controls in the controller
on your truck may be different.
key button controls. Consequently, most soft keys
function much like OFF/ON or momentary switches.
Refer to the Digital Controller Screens and functions
in this section and the SunSource Hog Technologies
User Guide for a description of the controls and fea-
tures available in each controller screen.
Joystick Control
A multifunction joystick is mounted in the truck
cab near the digital controller. The joystick and
switches in the joystick panels provide precision
control of the vehicle in work mode and the cutter.
The following is a description of the functions
and systems controlled by the joystick or joystick
switches.