Ruijie RG-S6250-48XS8CQ Series Switches Hardware Installation and Reference Guide Appendix D Cabling Recommendations in Installation
- 42 -
Cables not to be assembled or remaining parts of cables should be folded and placed in a proper position of the
cabinet or cabling slot. The proper position indicates a position that will not affect device running or cause device
damage or cable damage during commissioning.
220V and -48V power cords cannot be bundled on the guide rails of moving parts.
The power cables connecting moving parts such as door grounding wires should be reserved with some access
after assembled to avoid suffering tension or stress. When the moving part reaches the installation position, the
remaining part should not touch heat sources, sharp corners, or sharp edges. If heat sources cannot be avoided,
high-temperature cables should be used.
When using screw threads to fasten cable terminals, the bolt or screw must be tightly fastened, and anti-loosening
measures should be taken, as shown in Figure D-4.
