Hardware Installation and Reference Guide System Debugging
After the serial port parameters are set, click
OK
to enter hyper terminal window.
4.2 Power-on Startup
Checking before Power-on
Check if the switch is fully grounded.
Check if the fan module and the power module are correctly installed.
Check if the power cable is correctly connected.
Check if the power supply voltage complies with the requirement of the switch.
Check if the console cable is correctly connected; the terminal (can be a PC) used for configuration is already
started and the parameters are already configured.
Checking After Power-on (Recommended)
After power-on, you are recommended to perform the following checks to ensure the normal operation of follow-up
configurations.
Check if printed information appears on the terminal interface.
Check if the device indicator is normal.
