Hardware Installation and Reference Guide Product Overview
10GBASE-T port: There are 48 10GBASE-T ports, which are downward compatible with 1000BASE-T and
100BASE-TX.
QSFP+ port: There are six 40G QSFP+ ports, which support optical modules and DAC. This port can work in
4x10G mode.
Indicator
Indicator
Panel
Identification
Status
Meaning
Switch status indicator
(Front panel/Back
panel)
Status
Off
The system is not powered up.
Solid red
1) One of the modules of the system fails.
2) There are less than N fans (N+1 redundant fan).
3) The internal temperature exceeds the warning
working temperature, and the switching service
resets.
Blinking green.
The system is initializing.
Solid green
The system is operational.
Solid yellow
1) The temperature gets to the warning threshold.
2) Only N fans are in the position (N+1 redundant
fan).
3) One of the dual powers is not connected with the
AC power cord.
Switch locator indicator
(Front panel/Back
panel)
ID
Off
Device location is disabled.
Solid blue
Device location is enabled.
MGMT port indicator
MGMT
Off
The port is not connected.
Green
The port is connected at 1000Mbps.
Yellow
The port is connected at 10M/100M bps.
Blinking
The port is transmitting or receiving data.
10GBASE-T port status
indicator
1-48
Off
The port is not connected.
Solid green
The port is connected at 10G/1G/100M bps.
Blinking green.
The port is transmitting or receiving data.
QSFP+ port status
indicator
49F-54F
(4 x 10G
mode)
Off
The port is not connected.
Solid green
The port is connected at 10Gbps.
Blinking green.
The port is transmitting or receiving data.
49F-54F
(1 x 40G
mode)
Off
The port is not connected.
Solid green
The port is connected at 40Gbps.
Blinking green.
The port is transmitting or receiving data.
Power Supply
The RG-S6220-H series switches support power supply the RG-M6220-AC460E-F. The smart power supply module
supports power management, and the host can read input power, input current, and temperature in real time. The
power supply module supports hot swapping.
