Ruijie RG-S6220-32QXS-H Скачать руководство пользователя страница 11

Страница: 11 / 63

Hardware Installation and Reference Guide Product Overview

Extension Module

Unsupported

Fan Slot

3 (support 2+1 redundancy, configure at least two fan modules in one switch)

Fan Module

M6220-FAN-F

Power Supply

Slot

2 (s1 redundancy)

Power Module

RG-M6220-AC460E-F

Power Supply

Input

AC input

Rated voltage range: 100V AC to 240V AC

Maximum voltage range: 90V AC to 264V AC

Frequency: 50 Hz to 60 Hz

Rated current range: 5.29A to 2.2A

High voltage direct current (HVDC) input:

Input voltage range: 192V DC to 290V DC

Input current range: 2.66A to 2.03A

Power

Consumption

Less than 424 W

Optical Module

Refer to Appendix B

The supported modules update at any time, contact Ruijie Networks for details.

SFP+ Port

Unsupported

QSFP+ Port

Supported

FC Port

Unsupported

10GBASE-T Port

Supported

Temperature

Warning

Support temperature warning and over-temperature protection.

EMC Standards

GB9254-2008 CLASS A

Safety Standards

GB4943-2011

Working

Temperature

0°C to 45°C(32

F to 113

Storage

Temperature

-40°C to 70°C (-40

F to 158

Working Humidity

10% to 95% RH (non-condensing)

Weight

Net weight: 11 kg (including 3 fan modules and 2 power modules)

Dimensions

(L x W x H)

440 mm x 500 mm x 44 mm, 1U

RG-S6220-H switch is a class A product. In a domestic environment, this product may cause radio interference in

which case the user may be required to take adequate measures.

The 40G Ethernet port of the RG-S6220-48XT6QXS-H switch supports 3-meter DAC. For a detailed model and

specification, refer to Appendix B.

Product Appearance

The hardware of the RG-S6220-48XT6QXS-H includes the chassis, the power supply system and the heat dissipation

system.



The power supply system: Provides two power supply slots, which support 1+1 power supply redundancy. It is

recommended users configure power supply redundancy.

Содержание RG-S6220-32QXS-H
































































Результаты поиска

Содержание RG-S6220-32QXS-H

Отзывы:

Похожие инструкции для RG-S6220-32QXS-H

Бренды по названию

Популярные бренды

Ruijie RG-S6220-32QXS-H, Руководство по установке и справочное руководство по оборудованию

Результаты поиска

Содержание RG-S6220-32QXS-H

Отзывы:

Похожие инструкции для RG-S6220-32QXS-H

Бренды по названию

Популярные бренды