Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 997 / 1192

CLI Reference RLDP Configuration Command
rldp port
Use this command to enable RLDP on the port and specify detection type and troubleshooting method. Use the no
form of this command to disable the function.
rldp port { unidirection-detect | bidirection-detect | loop-detect } {warning | shutdown-svi | shutdown-port |
block}
no rldp port { unidirection-detect | bidirection-detect | loop-detect }
Parameter
description
Parameter Description
unidirection-detect Set unidirectional link detection.
bidirection-detect Set bidirectional link detection.
loop-detect
Set loop detection type.
warning Warn the user.
shutdown-svi Shutdown the SVI the port belongs to.
shutdown-port
Shutdown the port.
block
Disable the learning-forwarding function of the
port.
Default N/A.
Command
mode Interface configuration mode.
Usage
guidelines
The RLDP detection on the port takes effect only when the global
RLDP is enabled.
Examples
The following example demonstrates how to configure RLDP
detection on fas 0/1, specify the detection type as loop detection, and
troubleshooting method as block.
Ruijie(config)# interface fas 0/1
Ruijie(config-if)# rldp port loop-detect block
Related
commands
Command Description
rldp enable Enable RLDP globally.
rldp reset
Use this command to make all the ports that have been handled using rldp shutdown or disable to perform RLDP
detection again.