Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 98 / 1192

CLI Reference Guide Syslog Configuration Commands
Description - -
Defaults Logs are allowed to be displayed on different devices.
Command
Mode
Global configuration mode.
Usage Guide
RGOS can not only show the log information in the Console window and VTY window, but also
record it in different equipments such as the memory buffer, the FLASH and Syslog Server. This
command is the total log switch. If this switch is turned off, no log will be displayed or recorded
unless the severity level is greater than 1.
Configuration
Examples
The following example disables the log switch in the equipment.
Ruijie(config)# no logging on
Related
Commands
Command Description
logging buffered Record logs to an internal buffer.
logging server Record logs to the Syslog server.
logging file flash: Record logs on the FLASH.
logging console Set the log level to be displayed on the console.
logging monitor
Set the log level to be displayed on the VTY window (such
as telnet window).
logging trap Set the log level to be sent to the Syslog server.
Platform
Description
-
logging rate-limit
Use this command to enable log rate limit function to limit the output logs in a second in global
configuration mode. The no form of this command disables the log rate limit function.
logging rate-limit { number | all number | console { number | all number }} [ except severity ]
no logging rate-limit
Parameter
Description
Parameter Description
number
The number of logs processed in a second with the range
from 1 to 10000.
all Set rate limit to all the logs with severity level 0-7.
console Set the amount of logs shown in the console in a second.
except
By default, the severity level is error(3). The rate of the log
whose severity level is less than or equal to this severity level
is not controlled.