Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 951 / 1192

CLI Reference Guide QoS Configuration Commands
Examples
Ruijie(config)# interface fastEthernet 0/1
Ruijie(config-if)# rate-limit input 1000000 4096
Related
commands
Command Description
show mls qos
interface
-
policy maps
Use the following command to create a policy map and enter the policy map configuration mode
[no] policy-map policy-map-name
Use the following command to create the class map data classification used in the policy map and enter into the
data classification configuration mode.
[no] class class-map-name
Use the following command to set the ip_dscp value of the IP packets, which does not take effect for non-IP
packets.
set ip dscp new-dscp
no set ip dscp
Use the following command to set the cos value of the packets. With the none-tos configured, the DSCP value of
the packets will not be modified.
set cos new-cos [none-tos]
no set cos
Use the following command to limit the bandwidth and specify the method of handling the excessive part.
police rate-bps burst-byte [ exceed-action { drop | dscp dscp-value | cos cos-value [ none-tos ] }]
no police
Parameter
description
Parameter Description
policy-map-name Name of the policy map to be created
no policy-map
policy-map-name
Delete the existed policy map.
class-map-name Name of the created class map
no class
class-map-name
Delete the class map.
new-dscp
New DSCP value, whose range
varies with products.
new-cos New Cos value, in the range of 0 to 7.
rate-bps
The limitation of bandwidth per
second, in kbps
burst-byte The burst traffic limitation, in Kbyte