Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 903 / 1192

CLI Reference Guide ACL Configuration Commands
ACL Configuration Commands
command ID table
For IDs used in the following commands, refer to the command ID table below:
ID Meaning
ID
Number of access list. Range:
Standard IP ACL: 1 to 99, 1300 to 1999
Extended IP ACL: 100 to 199,2000 to 2699
Extended MAC ACL: 700 to 799
Extended expert ACL: 2700 to 2899
name ACL name
sn ACL SN (products can be set according to the priority)
start-sn Start sequence number
inc-sn Sequence number increment
deny If matched, access is denied.
permit If matched, access is permitted.
port
Protocol number. For IPv6, this field can be IPv6, icmp, tcp, udp and numbers
0 to 255. For IPv4, it can be one of eigrp, gre, ipinip, igmp, nos, ospf, icmp, udp,
tcp, esp, pcp, pim and ip, or it can be numbers 0 to 255 that represent the IP
protocol. It is described when some important protocols, such as icmp/tcp/udp,
are listed individually.
interface idx Interface index
src Packet source IP address (host address or network address)
src-wildcard Source IP address wildcard. It can be discontinuous, for example, 0.255.0.32.
src-ipv6-pfix Source IPv6 network address or network type
dst-ipv6-pfix Destination IPv6 network address or network type
pfix-len Prefix mask length
src-ipv6-addr Source IPv6 address
dst-ipv6-addr Destination IPv6 address
dscp Differential service code point, and code point value. Range: 0 to 63
flow-label Flow label in the range 0 to 1048575
dst Packet destination IP address (host address or network address)
dst-wildcard Destination IP address wildcard. It can be discontinuous, such as 0.255.0.32
fragment
Packet fragment filtering.
Note: Routers do not support the packet fragment filtering.