Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 84 / 1192

CLI Reference Guide CPU-LOG Configuration Commands
111 0% 1% 0% rl_con
112 75% 80% 90% idle
In the list above, the first 3 lines indicates the system CPU
utilization in 5sec, 1min and 5min, including LISR, HISR and
task. Then, it describes the detailed CPU utilization
distribution:

No
：
Sequence number

5Sec
：
CPU utilization of the tasks in 5sec.

1Min
：
CPU utilization of the tasks in 1min.

5Min
：
CPU utilization of the tasks in 5min.
The first 2 lines in the list above indicate the CPU utilization
of all LISRs and HISRs. From the 3
rd
line, it begins to refer to
the CPU utilization of the tasks. The last line refers to the
CPU utilization of the idle task, which is the same as the
“
System Idle Porcess
”
in the Windows. In the example
above, CPU utilization of idle task within 5s is 75%,
indicating that 75% CPU is idle.
cpu-log
Use this command to configure the low and high threshold of the cpu log utilization limit manually.
cpu-log log-limit low_num high_num
Parameter
description
Parameter Description
log-limit The command descriptor prompting the
log limit.
low_num Set the low threshold of the cpu log
utilization limit.
high_num Set the high threshold of the cpu log
utilization limit.
Default
By default, the high and low threshold of the cpu log
utilization limit are 100% and 90%.
Command
mode
Global configuration mode.