Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 664 / 1192

CLI Reference 802.1X Configuration Commands
Description
mac-based
This parameter enables the MAC address-based control
mode.
port-based This parameter enables the port-based control mode.
single-host
This parameter enables the port-based single-user control
mode.
Defaults MAC address-based control model
Command Mode Interface configuration mode
Usage Guide
Use the show dot1x port-control command to view the port's 802.1X setting.
Single-host is port-based single-user 802.1x access control. The user access
control will be shown as port-based on show dot1x port-control and dot1x
port-control-mode port-based single-host on show running-config .
Since single-host only supports one user, manually configuration of a port as
default-user-limit does not take effect in single-host mode. If the parameter
default-user-limit is configured for a port when single-host is adopted, only one user
can to use the network regardless of the parameter.
Configuration
Examples
Example 1 shows how to set the port to participate in 802.1x authentication:
Ruijie(config)# interface g 0/1
Ruijie(config-if)# dot1x port-control auto
Ruijie(config-if)# dot1x port-control-mode
port-based
Ruijie(config-if)# end
Ruijie#
Example 2 shows how to set 802.1x single-user authentication:
Ruijie(config)# interface g 0/1
Ruijie(config-if)# dot1x port-control auto
Ruijie(config-if)# dot1x port-control-mode
port-based single-host
Ruijie(config-if)# end
Ruijie#
Related Commands
Command Description
show dot1x
port-control
The command is used to view the port's 802.1x setting.
Show
running-config
The command is used to view the switch's setting.
dot1x private-supplicant-only
Use this command to support private clients in the global configuration mode. Use the no form of
this command to restore to the default setting.
dot1x private-supplicant-only