Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 663 / 1192

CLI Reference 802.1X Configuration Commands
dot1x port-control auto
In the interface configuration mode, use this command to allow the interface to be authenticated.
Use the no form of this command to restore the default setting.
dot1x port-control auto
no dot1x port-control
Parameter
Description
-
Defaults By default, interfaces do not participate in 802.1x authentication.
Command Mode Interface configuration mode
Usage Guide Use the show dot1x command to show the 802.1X setting.
Configuration
Examples
The following example shows how to set the port to participate in authentication:
Ruijie# configure terminal
Ruijie(config)# interface g 0/1
Ruijie(config-if)# dot1x port-control auto
Ruijie(config-if)# end
Ruijie#
Related comman ds
Command Description
show dot1x The command is used to view the 802.1x setting.
Platform
Description
-
dot1x port-control-mode
By default, 802.1x controls users by controlling their MACs and only authenticated users have
access to the network. In the port-based control mode, if one user that connects to the port passes
the authentication, this port becomes an authenticated port and all users that connect to this port
have access to the network. In the port-based single-user control mode, the port is authenticated
when it allows only one authenticated user, who can access the network. In the port-based
single-user control mode, If multiple users connect to a authenticated port, all the users on the port
must be cleared and re-authenticated. The authentication mode can be configured using the
following commands:
dot1x port-control-mode { mac-based | { port-based [single-host]} }
no dot1x port-control-mode
Parameter Parameter Description