Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 648 / 1192

CLI Reference 802.1X Configuration Commands
Usage Guide
The command is used to set the number of authentication request messages sent
actively. Use the show dot1x auto-req command to show the setting of this
function.
Configuration
Examples
The following example shows how to enable a device to initiate 802.1x
authentication actively and continuously:
Ruijie# configure terminal
Ruijie(config)# dot1x auto-req packet-num 0
Ruijie(config)# end
Ruijie# show dot1x auto-req
Auto-Req: Enabled
User-Detect : Enabled
Packet-Num : 0
Req-Interval: 30 Second
Related Commands
Command Description
show dot1x
auto-req
The command is used to show the setting of the active
authentication function.
Platform
Description
-
dot1x auto-req req-interval
Use this command to set the interval of sending authentication request messages. Use the no form
of this command to apply the default value.
dot1x auto-req req-interval interval
no dot1x auto-req req-interval
Parameter
Description
Parameter Description
interval
The parameter specifies the time interval between two
authentication request messages sent actively by the device,
in second.
Defaults 30 seconds
Command Mode Global configuration mode
Usage Guide Use the show dot1x auto-req command to show the setting of this function.
Configuration
Examples
The following example shows how to set the time interval to 60s:
Ruijie# configure terminal
Ruijie(config)# dot1x auto-req req-interval 60
Ruijie(config)# end