Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 457 / 1192

CLI Reference DHCPv6 Configuration Commands
Platform
Description
N/A
iana-address prefix
Use this command to set the IA_NA address prefix for the DHCPv6 Server. Use the no form of this
command to remove the IA_NA address prefix.
iana-address prefix ipv6-prefix/prefix-length [ lifetime { valid-lifetime | preferred-lifetime } ]
no iana-address prefix
Parameter
Description
Parameter Description
ipv6-prefix/prefix-length Set the IPv6 prefix and prefix length.
lifetime
Set the lifetime of the address allocated to the client.
With the keyword lifetime configured, both parameters valid-lifetime
and preferred-lifetime shall be configured.
valid-lifetime Set the valid lifetime of using the allocated address for the client.
preferred-lifetime Set the preferred lifetime of the address allocated to the client.
Defaults By default, no IA_NA address prefix is configured;
The default valid-lifetime is 3600s (1 hour).
The default preferred-lifetime is 3600s (1 hour).
Command
Mode
DHCPv6 pool configuration mode.
Usage Guide This command is used to set the IA_NA address prefix for the DHCPv6 Server, and allocate the
IA_NA address to the client.
The Server attempts to allocate a usable address within the IA_NA address prefix range to the client
upon receiving the IA_NA address request from the client. That address will be allocated to other
clients if the client no longer uses that address again.
Configuration
Examples
Ruijie(config-dhcp)# iana-address prefix 2008:50::/64 lifetime 2000
1000Ruijie(config-if)# ip verify urpf drop-rate notify
Related
Commands
Command Description
ipv6 dhcp pool Set the DHCPv6 pool.
show ipv6 dhcp pool Show the DHCPv6 pool information.
Platform
Description
N/A