Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 425 / 1192

CLI Reference DHCP Configuration Commands
Parameter
description
Parameter Description
client-name
Name of DHCP client, a set of standards-based
ASCII characters.The name should not include the
suffix domain name. For instance, you can define
the name of the DHCP client as river, not
river.i-net.com.cn.
Default No client name is defined.
Command
mode DHCP address pool configuration mode.
Usage
guidelines
This command can be used to define the name of the DHCP client
only when the DHCP is defined by manual binding. This name should
not include the suffix domain name.
Examples
The example below defines a string river as the name of the client.
client-name river
Related
commands
Command Description
host
Define the IP address and network mask, which is
used to configure the DHCP manual binding.
ip dhcp pool
Define the name of the DHCP address pool and
enter the DHCP address pool configuration mode.
default-router
Use this command to define the default gateway of the DHCP client in the DHPC address pool configuration
mode.The no form of this command can be used to delete the definition of the default gateway.
default-router ip-address [ ip-address2…ip-address8 ]
no default-router
Parameter
description
Parameter Description
ip-address
Define the IP address of the equipment. It
is required to configure one IP address at
least.
ip-address2…ip-address8
(Optional) Up to 8 gateways can be
configured.
Default No gateway is defined by default.
Command
mode DHCP address pool configuration mode.