Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 352 / 1192

CLI Reference IP Address Configuration Commands
arp retry times number
no arp retry times
Parameter
Description
Parameter Description
number The times of sending the same ARP request in the range
1 to100..When it is set as 1, it indicates that the ARP
request is not retransmitted, only 1 ARP request
message is sent.
Defaults If the ARP response message is not received, the ARP request message will be sent
for 5 times, and then it will be timed out.
Command
Mode
Global configuration mode.
Usage Guide The switch sends the ARP request message frequently, and thus causing problems
like network busy. In this case, you can set the retry times of the ARP request
smaller. In general, the retry times should not be set too large.
Configuration
Examples
The following configuration will set the local ARP request not to be retried.
arp retry times 1
The following configuration will set the local ARP request to be retried for one time.
arp retry times 2
Related
Commands
Command Description
arp retry interval seconds Set the retry interval of the ARP request
message.
Platform
Description
N/A
arp timeout
Use this command to configure the timeout for the ARP static mapping record in the
ARP cache. The no form of this command restores it to the default configuration.
arp timeout seconds
no arp timeout
Parameter
Description
Parameter Description
secondsv The timeout ranging 0 to 2147483 seconds