CLI ReferenceInterface Configuration Commands
LLDP Configuration Commands
seconds
LLDP packet transmission delay. Configurable range: 1-8192.
Default
2 seconds
Command
mode
Global configuration mode.
Usage
guidelines
An LLDP-enabled port will send LLDP packets when the local device information changes. To avoid
frequently sending LLDP packets due to the frequent local device information change, configure the
LLDP packet transmission delay to control the frequent transmission of LLDP packets.
Examples
Configure LLDPDU transmission delay to 3 seconds:
Ruijie# configure terminal
Ruijie(config)#lldp timer tx-delay 3
Related
commands
Command
Description
show lldp status
Display LLDP status information.
Platform
description
Only supported by switch products.
lldp timer tx-interval
Configure the interval of sending the LLDP packets. Use
no
form of this command to restore the
interval to the default setting.
lldp timer tx-interval
seconds
no lldp timer tx-interval
Parameter
description
Parameter
Description
seconds
Interval of sending the LLDP packets. Configurable range: 5-32768.
Default
30 seconds
Command
mode
Global configuration mode.
Usage
guidelines
-
Examples
Configure the interval of sending the LLDP packets to 10 seconds:
Содержание RG-S2600G-I Series
