Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 275 / 1192

CLI ReferenceInterface Configuration Commands MSTP Configuration Commands
Configuration
Examples
The following example sets the device priority of Instance 20 to 8192.
Ruijie(config-if)# spanning-tree mst 20 priority 8192
You can verify your settings by entering the privileged command
―
show spanning-tree mst
instance interface instance-id
‖.
Related Commands
Command Description
show spanning-tree mst
Show the MSTP information of an interface.
spanning-tree mst cost Set path cost.
spanning-tree mst port-priority Set port priority of different instances.
Platform Description -
spanning-tree pathcost method
This command is used to configure the path cost of a port. You can use the no option of the
command to restore the default setting.
spanning-tree pathcost method { { long [ standard ] } | short }
no spanning-tree pathcost method
Parameter
Description
Parameter Description
long [ standard ]
Adopt the 802.1t standard to set path cost.
The
―standard‖ indicates to use the expression
recommended by the standard to calculate the cost.
short Adopt the 802.1d standard to set path cost.
Defaults The 802.1T standard is adopted to set path cost by default.
Command Mode Global configuration mode
Usage Guide -
Configuration
Examples
Ruijie(config-if)# spanning-tree pathcost method long
Related Commands
Command Description
show spanning-tree interface
Show the STP configuration of the interface.
Platform Description -