Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 272 / 1192

CLI ReferenceInterface Configuration Commands MSTP Configuration Commands
name Configure the name of MST.
revision Configure the version number of MST.
Platform Description -
spanning-tree mst cost
This command is used to set the path cost of each instance in the interface configuration mode.
You can use the no form of the command to restore the default setting.
spanning-tree [ mst instance-id ] cost cost
no spanning-tree [ mst instance-id ] cost
Parameter
Description
Parameter Description
instance-id
Instance ID in the range of 0 to 64
cost Path cost in the range of 1 to 200,000,000
Defaults
The default instance-id is 0.
The default value is calculated by the link rate of the interface automatically.

1000 Mbps
—20000

100 Mbps
—200000

10 Mbps
—2000000
Command Mode Interface configuration mode
Usage Guide A higher cost value means a higher path cost.
Configuration
Examples
This example shows how to set the path cost to 400 on an interface associated with instances 3:
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# spanning-tree mst 3 cost 400
You can verify your settings by entering the show spanning-tree mst interface interface-id
command in privileged EXEC mode.
Related Commands
Command Description
show spanning-tree mst Show the MSTP information of an interface.
spanning-tree mst port-priority Configure the priority of an interface.
spanning-tree mst priority
Configure the priority of an instance.
Platform Description -