Ruijie RG-S2600G-I Series, Справочное руководство CLI

Страница: 226 / 1192

CLI ReferenceInterface Configuration Commands VLAN Configuration Commands
Command
mode
Interface configuration mode.
Usage Guide If a switch port mode is access port, it can be the member port of only one VLAN. Use the switchport
access vlan command to specify the member of the VLAN.
A trunk port can be the member port of various VLANs defined by the allowed-VLAN list. The allowed
VLAN list of the interface determines the VLANs to which the interface may belong. The trunk port is
the member of all the VLANs in the allowed VLAN list. Use the switchport trunk command to define
the allowed-VLANs list.
Configuration
Examples
Ruijie(config-if)# switchport mode trunk
Related
Commands
Command Description
switchport access Use this command to configure an interface as
a statics access port and assign it to a VLAN.
switchport trunk Use this command to specify a native VLAN
and the allowed-VLAN list for the trunkport.
Platform
Description
N/A
switchport trunk
Use this command to specify a native VLAN and the allowed-VLAN list for the trunk port. Use the no
form of the command to restore the default setting.
switchport trunk { allowed vlan { all | [ add | remove | except ] vlan-list } | native vlan vlan-id }
no switchport trunk { allowed vlan | native vlan }
Parameter
Description
Parameter Description
allowed vlan vlan-list Configure the list of VLANs allowed on the trunk port. vlan-list can be
a VLAN or a range of VLANs starting with the smaller VLAN ID and
ending with the larger VLAN ID and being separated by hyphen, for
example, 10 to 20. The segments can be separated with a comma (,),
for example, 1 to 10, 20 to 25, 30, and 33.
all means that the allowed VLAN list contains all the supported
VLANs;
add means to add the specified VLAN list to the allowed VLAN list;
remove means to remove the specified VLAN list from the allowed
VLAN list;
except means to add all the VLANs other than those in the specified
VLAN list to the allowed VLAN list;